Finding your suitable readers for 10 foot ice maker connector is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 10 foot ice maker connector including detail information and customer reviews. Let’s find out which is your favorite one.
798 reviews analysed
1. Eastman 41036 Flexible Stainless Steel Braided Icemaker Connector with Brass Nuts, 1/4-Inch Comp X 1/4-Inch Comp, 10-Feet
- LENGTH: The line length of this ice maker connector is 10-feet
- CONNECTION: This connector has 1/4-inch Comp x 1/4-inch Comp connection
- MATERIAL: This ice maker connector hose is made of high-impact braided 304 stainless steel exterior with a PVC core, nylon reinforcement and a clear vinyl outer shell which provides strength
- DURABLE: The sturdy stainless steel connector makes it durable preventing kinking and has nickel-plated brass nuts which ensure tight fitting
- EASY INSTALLATION: This flexible supply line is very easy to install
The Eastman 41036 Ice Maker Connector has a 1/4-inch comp x 1/4-inch comp connection and is 10-feet long. The supply line features a PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping making it long-lasting. It consists of nickel-plated brass nuts which ensure secure fitting.
Eastman’s 10′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. This flexible supply line resists corrosion and enables easy installation.
MAINTAINANCE: For use with water in accessible locations only.
• Shut off the water before installing.
• Inspect product before installing. Do not use if damaged in any way.
• Metal nuts – HAND-TIGHTEN, plus ¼ turn with a wrench.
• Do not over tighten.
• Do not use thread lubricants, tape, or putty.
• Do not expose to corrosive materials.
• Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage.
• This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded.
• DO NOT reuse
• CAUTION: Improper installation can cause leaks with water damage.
From the Manufacturer
Eastman’s 10′ Stainless Steel Icemaker Connector is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.
2. FlexCraft 26610-NL, Ice Maker Supply Line, Connects Ice Maker to Water Supply, Ice Maker Hose With 1/4 in Fittings On Both Ends, Braided Stainless Steel 10 Ft
- BURST PROOF: Flexcraft ice maker connector is made of super-high tensile strength braided stainless steel protects PVC inner tube, ensuring maximum pressure and performance.
- SPECIFICATIONS: 10 ft long with 1/4 in. x 1/4 in diameter, 125 PSI, Working Temperature 40 F-140 F
- UNIVERSAL FIT: pipe has 1/4 Brass chrome fitting on both ends and is compatible with most ice makers
- EASY INSTALLATION: prevents kinking or crimping for easy isntallation
- CERTIFICATION: UPC certified, Lead Free
This is an Everflow Supplies lead free flexible ice maker supply line, made of stainless steel braided tube. In particular, it has a length of 120 inch and it has two 1/4 inch compression fittings on both ends. Furthermore, upc, nsf and csa approved the part for meeting the lead free nsf 61-g standards.
3. LDR 509 5100 Ice Maker/Humidifier Installation Kit, 1/4-Inch x 25-Foot, Poly Tubing
Highlights: For installation of humidifiers iice makers and evaporative coolers Include 1/4 x 25 poly tubing, and self piercing saddle valve 1 Kit/Polybag.
From the Manufacturer
LDR 509 5100 Ice Maker/Humidifier Installation Kit , 1/4-Inch X 25-Foot, Poly Tubing. 1/4-Inch X 25-Foot Ice Maker/Humidifier Installation Kit With Poly Tubing includes tubing, self-piercing saddle valve and fitting. Install ice maker or humidifier without turning water off.
4. Kelaro Ice Maker Connector Hose, 10-Foot Stainless Steel – 1/4" Compression Connections – Lead Free
- 10 FOOT LONG, 1/4″ Compression Thread x 1/4″ Compression Thread Stainless Steel Braided Ice Maker Installation Kit
- EASY TO INSTALL. Connect most refrigerator ice makers, in-door water dispensers and filters to household water supply. Perfect for Homeowner or Contractor Installation
- Premium Grade 304 STAINLESS STEEL, PVC Core. BRASS nuts, ferrules and nipples for superior Corrosion Resistance
- BURST PROOF Icemaker Hose Design and 5 YEAR Limited Warranty
- LEAD FREE AB 1953 Safe for drinking water, UPC (Uniform Plumbing Code), NSF 61 (National Sanitation Foundation) and CSA (Canadian Standards Association) Certifications
Stainless Steel Ice Maker Supply Line Hose 10 Ft (120-in) Burst Proof 1/4″ Compression Connections – Lead Free
5. Fluidmaster 12IM72 Ice Maker Connector, Braided Stainless Steel – 1/4 Compression Thread x 1/4 Compression Thread, 6 Ft. (72-Inch) Length
- 72” in length
- ¼ COMP x ¼ COMP Female Compression Thread Connection
- Lead Free
- Easy Install
- Braided stainless steel construction won’t kink or crease
- Heavy-duty nickel-plated brass hex nuts are easy to grip and provide durability
- Replaces old copper or vinyl connectors
- Meets all code requirements
This Fluidmaster Braided Stainless Steel 6-Foot (72 in) Length Ice Maker Supply Line connects your Icemaker to the wall water supply. Fluidmaster Icemaker water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors exceed every code requirement in the book for durability. Fluidmaster offers a wide variety of types and sizes, perfect for your home improvement efforts. A proven supply line that won’t crease or tangle even in the tightest of corners. Durability and ease-of-use were at the forefront of this design, with the nickel plated brass hex nuts for easy to grip tightening. A 1/4-Inch female compression thread by 1/4-Inch female compression thread connector with an efficient flow rate. Code approved with a 5 year warranty.
From the Manufacturer
Fluidmaster is the #1 toilet repair brand in the world. Fluidmaster parts are found in more toilets than all other brands. The customer’s first choice and preferred supplier of toilet tank trim since 1957. Fluidmaster’s complete line of toilet repair parts includes; fill valves, flush valves, flappers, tank levers, dual flush valves, bowl wax, toilet repair kits, seals, connectors and more. With manufacturing facilities across the world, Fluidmaster reaches over 90 countries worldwide with unparalleled quality.
6. Certified Appliance Accessories Braided Stainless Steel Ice Maker Connector, 15ft
- Braided stainless Steel ice maker connector
- 1/4 inch fem. x 1/4 inch fcm
- Upc, NSF/ANSI 61 & case certified Certified Appliance Accessories recommends installation of this product be performed by a licensed professional
- Braided stainless steel
- 1/4 -Inch Comp x 1/4-Inch Comp
- 5 year warranty- From the Manufacturer
Are you replacing a 5+ year-old ice maker connector hose or hooking up a new ice maker? This 15 ft. Braided Stainless Steel Ice Maker Connector from Certified Appliance Accessories is just what you need. It is corrosion-resistant inside and out plus bends freely for easier installation in cramped spaces.
From the Manufacturer
Ice Maker Connectors (15-Foot)
7. Eastman 48316 icemaker connector
- LENGTH: The length of this connector hose is 8-Feet long
- DIMENSION: This supply line connector features 1/8-inch ID (1/4-inch OD) PEX hose
- MATERIAL: This hose is made of high-impact PEX which provides strength as well as includes brass captured nuts
- DURABLE: The PEX material of this appliance connector provides durability which prevents it from kinking making it last longer
- EASY INSTALLATION: This refrigerator ice maker connector is quick and easy to install without hassle
8. Certified Appliance Accessories IM120SS Braided Stainless Steel Ice Maker Connector (10ft)
9. Eastman 48283 Braided Stainless Steel Ice Maker Connector, 8-foot, Silver
- The ice maker connector measures 8 feet in length and is equipped with a universal design with a 1/4 inch Comp connection on each end
- Designed to endure high-pressure without bursting
- Constructed with an inner PVC tube and a braided stainless steel exterior for a long-lasting performance without water leaks, kinking, crimping and corrosion
- The flexibility makes it easy to maneuver in tight spaces during installation
The Eastman Ice Maker water supply line features a braided stainless steel exterior with a PVC inner tube for durability. It is designed for a universal fit with a 1/4-inch compression x 1/4-inch compression connection that is compatible with most brands of ice makers.
This connector meets Lead-Free guidelines for safe use in water drinking applications. Its flexibility makes it easy to maneuver in tight spaces during installation, no additional tools or supplies are required or recommended. Water supply lines should be inspected every 6-months.
By our suggestions above, we hope that you can found 10 Foot Ice Maker Connector for you.Please don’t forget to share your experience by comment in this post. Thank you!