The Best Dash Miner

1. Specifications of the Antminer D3 are as follows:

a) Hash rate: Hash rate: 19.3 GH/s (Variation of ±5% is expected)

b) Power consumption: 1200W (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temp).

c) Dimensions of the miner: 12.6 x5.12 x 7.5″

d) Hashing algorithm: X11 – Compatible Coins: DASH, ADZ, ARC, ATX, BOLI, BOPS, BSC, CANN, CNO, CNT, COXST, CREVA, CRM, DP, ENT, ERY, FAL, GILL, GRN, HCC, HPC, INFX, J-x11, KASH, KURT, LGBTQ, LKC, MAR, MARX, MMM, MND, MUE, OGN, ONX, OZC, PIZZA, PXI, SAND, SEV, SMC, START, TOR, TREAU, UIS-x11, VLTC, XCXT, XVP

2. Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.

3. It recommends use of the APW3++ PSU with the Antminer D3. One APW3++ PSU can not power more than one Antminer D3. (NOT INCLUDED)

4. All PCIe connectors on a hashing board need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!

5. Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the PCIE connectors are connected to power supply.

6. Please select the correct address for shipping before you submit your order because, the shipping address cannot be changed after the order has been submitted. The seller does not take any responsibility for or compensate for any loss as result of downtime caused by delays in transportation as a result of custom formalities or other reasons.

Specifications of the Antminer D3 are as follows: a) Hash rate: Hash rate: 19.3 GH/s (Variation of ±5% is expected) b) Power consumption: 1200W (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temp). PSU is INCLUDED! c) Dimensions of the miner: 12.6 x5.12 x 7.5″ d) Hashing algorithm: X11 2. It recommends use of the APW3++ PSU with the Antminer D3. One APW3++ PSU can not power more than one Antminer D3. All PCIe connectors on a hashing board need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board! – Please select the correct address for shipping before you submit your order because, the shipping address cannot be changed after the order has been submitted. ALL SALES ARE FINAL: 1. A 180-day warranty is provided starting from November 20, 2017 2. The warranty only applies to the original purchaser who purchased the machine. 3. All sales are final. Strict 50% restocking fee for returns. Do not order if you object to the restocking fee. Customer must inspect and test device upon delivery and contact seller within 48 hours to avoid restocking fees. Must be returned with original packaging. Overclocking, using a third party shipping forwarder, or taking the device out of country will void the warranty. Serial numbers are recorded and returns must match. 4. The following events will void the warranty: a. Customer removes/replaces any components by himself; b. Damage caused by poor power supply, lightning or voltage surges; c. Burnt parts on hash boards or chips; d. Miner/boards/components damage due to water immersion or corrosion due to wet environment. 5. We do not take any responsibility for or compensate for any loss as result of downtime caused by delays in transportation as a result of custom formalities or other reasons.

1. Specs:
(A) Hash rate: 17.0 GH/s ±5%
(B) Power consumption: 970W. Power consumption also depends on your PSU’s efficiency.
(C) Dimensions: 14″ x 5″ x 8″
(D) Hashing algorithm: X11
(E) Compatible Coins: DASH, ADZ, ARC, ATX, BOLI, BOPS, BSC, CANN, CNO, CNT, COXST, CREVA, CRM, DP, ENT, ERY, FAL, GILL, GRN, HCC, HPC, INFX, J-x11, KASH, KURT, LGBTQ, LKC, MAR, MARX, MMM, MND, MUE, OGN, ONX, OZC, PIZZA, PXI, SAND, SEV, SMC, START, TOR, TREAU, UIS-x11, VLTC, XCXT, XVP

2. Due to the nature of these products, there are higher than normal restocking fees (typically 40%). The restocking fees are typically waived in the event that there is a provable failure within the first 30 days and the warranty has not been voided by overclocking. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a return.

3. *A POWER SUPPLY IS NOT INCLUDED.* The APW3++ PSU is recommended above all other PSUs and works with this device when using regular 110v power or 220v power. One APW3++ PSU can only power a single AntMiner D3.

4. Restocking fees for mining devices are 40%. Fees are typically waived if there is a provable failure within the first 30 days. Overclocking will void all warranties. Reach out to the seller immediately if a failure occurs within 30-days of delivery to begin troubleshooting or processing a return.

Special provision

Item was plugged in and tested for a few hours to make sure it works properly! Please only buy if you are informed how to use this.

Scrypt Mining Hash Rate: 504MH/s (±7% is expected).
Compatible Coins: Litecoin and any other Scrypt-based coins.
Power Consumption: 800W (±10%) at the wall.
Noise level: Loud. Not for desk-top use. Sounds like a vacuum.
Chip quantity per unit: 288 x BM1485.
Rated Voltage: 11.60 ~13.00V.
Operating Temperature: 0C to 40C.
Network Connection: Ethernet (cable not included).

Notes:
1. Due to the nature of these products, there are higher than normal restocking fees (typically 40%). The restocking fees are typically waived in the event that there is a provable failure within the first 30 days. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a return.
2. Each AntMiner L3+ requires NINE 6-pin PCI-e connectors for 12V DC input (must be very stable power supply) There are four hash boards that require two 6-pin PCI-e connectors each and one additional 6-pin PCI-e connector on the controller. All NINE 6-pin PCI-e connectors are required. Do not connect more than one PSU to the same hash board to prevent possible damage and instability.
3. Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.
4. Power supply unit is NOT included. Bitmain recommends the APW3++ power supply for the AntMiner L3+.
5. AntMiners are LOUD. The L3+ sounds like a vacuum and is not recommended for use within homes. Many people use basements or sheds, but returns due to noise will be subject to the full restocking fee.
Compatible Coins: Any coin based on the Scrypt algorithm. There are many dozen coins, but the most well known is Litecoin.

*POWER SUPPLY IS NOT INCLUDED*
Bitmain recommends using the APW3++ or APW7 power supply.

AntMiner V9 Specifications:
1. Hash Rate: 4.0 TH/s ±5%
2. Power Consumption: 1027W ±10% (at the wall, with Bitmain PSU, 93% efficiency, 25C ambient temp)
3. Power Efficiency: 0.253 W/GH ±7% (at the wall, with Bitmain PSU, 93% efficiency, 25°C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. ASIC Chip: BM1580
6. Dimensions: 301mm(L)*123mm(W)*155mm(H)
7. Cooling: 2x 12038 fans
8. Operating Temperature: 0 °C to 40 °C
9. Network Connection: Ethernet (network cable not included)

Please note the following:
1. Due to the nature of these products, there are higher than normal restocking fees (typically 40%). The restocking fees are typically waived in the event that there is a provable failure within the first 30 days and the warranty has not been voided by overclocking. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a return.
2. Each AntMiner V9 requires TEN 6-pin PCI-e connectors for 12V DC input (must be very stable power source). There are three hash boards that each require THREE 6-pin PCI-e power connectors and one additional 6-pin PCI-e power connector on the controller. All TEN 6-pin PCI-e power connectors are required. Do not connect more than one PSU to the same hash board to prevent possible damage and instability.
3. Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.
4. Power supply unit is not included. Bitmain recommends the APW3++ or APW7 power supply for the AntMiner V9.

The Incredible 2 follows the adventures of the Parrs, a family of Supers(humans with super abilities). The Parrs include the father, Bob, also known as Mr. Incredible who possesses super strength, Helen, his wife also known as Elastigirl for the ability to stretch her body, and their children Violet, who can become invisible and project force fields, Dash, who possesses super speed, and Jack-Jack, their infant who can transform into a number of forms. The sequel will start “a minute” after the end of the first film, where the Parrs are just about to face the Underminer.

48 Pieces mini pixel notepads pixelated spiral notebook miner crafting style notebooks for pixelated party supplies, mining theme party favors

Features:

Colorful combination:
This collection of spiral notebooks features a variety of colors, with miner crafting style patterns printed on the cover, cool and colorful design, funny to use yet easy to distinguish, you can use different color for different purposes but will not mix the color easily, suitable for school and work use.

Easy to use:
Sturdy paperboard front and back covers protect your notes and provide a sturdy surface when fixed surfaces aren’t handy, so you can write down your notes anywhere. The notepads are held together by sturdy wire binder that prevent pages from tearing off on their own, but let you easily tear off pages once you are finished with them. The snag-free coil binding across the top also make it easier to flip the pages, and convenient for people to write with left or right hands.

Convenient to carry:
Our mini pixel notepads is made lightweight to address convenience and portability. It helps you remind yourself of all of your daily tasks and routines, and avoid forgotten and overlooked workloads. Easy to slip inside your pouches, school bags, purses, and wallets.

Specifications:
Material: paper
Size: approx. 2.3 x 3.5 inches
Quantity: 48 pieces

Package includes:
48 x Mini pixel notepads

You would get 24pcs 12″ Double sided pixelated mining style latex balloons.

It including 4 red TNT with “Happy Birthday” on the other side, 4 black pixel spider with Endermonster on the other side, 4 white pixel skeleton with treasure chest on the other side, 4 green pixel zombie monster with creepah monster on the other side, 4 brown pixel cow with “Happy Birthday” on the other side, 4 blue clouds with “Happy Birthday” on the other side.

High quality material ,the latex balloons are strong and long lasting, not easy to burst in your party. non-toxicity and harmlessness, support helium or air, never heard pop sound.

Perfect for Gaming Themed Birthday Parties, Video Game Night or any Party.

Please Note: These balloons ship uninflated.