
We spent many hours on research to finding refrigerator coil hose, reading product features, product specifications for this guide. For those of you who wish to the best refrigerator coil hose, you should not miss this article. refrigerator coil hose coming in a variety of types but also different price range. The following is the top 9 refrigerator coil hose by our suggestions
698 reviews analysed
1. Dryer Duct Cleaning Kit- Generic Vacuum Hose Attachment Flexible and 30 inch Flexible Dryer Vent Cleaning Brush and Refrigerator Coil Brush/Radiator Brush. Fits Vacuum Hoses 1 1/4 inches or Less
Feature
- You will receive – one flexible 24 inch crevice tool cleaner with 3 adapters and one long 30 inch brush
- VACUUM ATTACHMENT: 24″ Long – The tip width measures 5/8 inch check with of area you want to clean. With supplied adapters fits vacuum hoses up to 1 3/4 inches ** Does not fit Dyson **
- You can use the crevice tool without the adapters if it fits or use one or all 3 adapters to make it fit your vacuum hose. The adapters will fit into each other to make a variety of connections. Just try one till it fits. The smallest size they will fit is 1 1/16 inches up to 1 3/4 inches. You’ll probably say these REALLY are the Worlds Greatest Adapters.????
- BRUSH SPECS: Full Brush Length: 30” – Without Handle: 24-1/4” – Bristles Diameter: 1-1/2” – Steel Wire Diameter: 3/8” – Brush color: black – Handle Color: black – Longer than other brands.
- BRUSH USES: Clean your dryer lint trap, fridge coils/ condenser coils, exhaust vents, AC vents, radiators and under your appliances. Bends like a lizard in your dyer lint trap but is not too flimsy.
2. Dryer Vent Cleaner Kit 28 Inch Cleaner Lint Trap Flexible Refrigerator Coil Brush and Vacuum Hose Attachment Set for Vacuum Hoses 1 1/4 inches or Less (6 Pack)
Feature
- VACUUM ATTACHMENT: 24″ Long – Inside measurement where your nozzle fits is 1 3/8 inches(35mm) and the tip width measures 0.6 inches(15mm) Fits vacuum hoses with a 1.25 inches or less diameter because of tapered end. Important – your vacuum hose needs to have a diameter of 1.25 or less to fit (if the size not ,you can use the adapter to change the 32mm to 35mm )
- Hose Attachment Is Flexible But Not Flimsy : Has better airflow than others and does not clog as easy as others. Perfect vacuum attachment for under the fridge, dryer lint or hard to reach areas.
- Improve Dryer Efficiency:Removing debris, lint, and trash from your lint trap and tubing can reduce the risk of fires, improve drying efficiency, and extend dryer life.
- You will receive :one flexible 24 inch crevice tool cleaner and one long 28 inch brush , one dusty brush and one dyson adapter. If you are not sure if it will fit your vacuum please ask a question and we will respond.
- Design & Quality: Sturdy thick nylon bristles mounted on a galvanized wound steel bendable wire shaft moves through narrow slots picking up the lint, with a non-slip Pure Wood handle to reach inaccessible places easily – Lint vacuum remover rubber tip prevents scratches.
Description
Included in this kit is a 24 inch flexible hose attachment for hard to reach areas like down in your dryer lint trap or under your refrigerator, Also, included is one 28 inch long Flexible Dryer Vent and Refrigerator Brush, this brush is on twisted wire and flexible and the benefit of that is it will easily conform to the shape of your dryer lint trap, If your dryer vent is badly clogged use the brush first to get the bulk out then use the vacuum crevice tool. Both the hose attachment and brush are flexible and can bend back straight. They will arrive flexed/curved for easier shipping but will straighten out or bend to your application of use. To assemble the crevice tool run warm water over the ends of the hose which will make inserting ends easy. The length of vacuum tool may vary by 1/2 inch. Please make sure that your vacuum hose has a diameter of 1 1/4 inches or less. some Shark vacuum cleaners are 1.5 inches which is too big for this crevice tool, This tool will fit most vacuum hoses, but please measure the end of your hose to make sure it will fit. Here is a partial list of Shark vacuums that it will fit: Shark Duo Clean, Shark Ion Flex, Shark Flex, Shark Rocket. — The Shark Navigator and Swivel Steering – it will fit inside the hose but is not a tight fit, but will work, Shark Professional it will fit but you need to push it on. Does not fit Newer Bissells (unsure of older Bissells -please measure).
3. Gadjit Exten Vac Flat Vacuum Cleaner Attachment Hose Extender (Gray)- 36" Reach Under Fridge and Heavy Furniture, Vacuums Up Dirt and Dust Bunnies, Great for Big and Small Cleaning Projects
Feature
- Ever wonder what’s living and hiding under your fridge or furniture? Dust bunnies, crumbs & pet hair — oh my!
- Let the long arm of Gadjit Exten Vac get rid of those hidden messes!
- Exten vac is a flat vacuum attachment that reaches under appliances and heavy furniture to remove dust and dirt.
- Adjusts to fit on most vacuum cleaner hoses. Perfect tool for the job.
- Has a 36 inch reach! Two piece design easily snaps together. MADE IN CANADA.
Description
Gadjit Exten Vac is an Extendable Under-Appliance and Furniture Vacuum Cleaner Wand that Vacuums Up Dirt, Crumbs, and Dust Bunnies. Exten Vac is a flat vacuum attachment that is made for cleaning under refrigerators, ovens, dishwashers, and even heavy furniture. It adjusts to fit most vacuum cleaner hose and provides a 36” reach. That’s three extra feet of cleaning power! EASY TO USE: To attach Exten Vac, just slide the graduating end of the Exten Vac into the end of your vacuum hose until it stops. Consists of two sturdy pieces of plastic that easily snap together. Specifications: Color: Gray Dimensions: 20.25″ x 2.25″ x 2″ Made in Canada UPC: 728685401157
4. Dryer Cleaning Kit – Generic Vacuum Hose Attachment Flexible and 28 inch Flexible Dryer Vent Cleaning Brush and Refrigerator Coil Brush. Fits vacuum hoses 1 1/4 inches or less -by Mountain Trades
Feature
- You will receive – one flexible 24 inch crevice tool cleaner and one long 28 inch brush
- VACUUM ATTACHMENT: 24″ Long – Inside measurement where your nozzle fits is 1 3/8 inches(35mm) and the tip width measures 0.6 inches(15mm) Fits vacuum hoses with a 1.25 inches or less diameter because of tapered end. ** Important – your vacuum hose needs to have a diameter of 1.25 or less to fit)** Does not fit Dyson ** See Description below for info on Shark Vacuum Cleaners. (measure the Shark vacuum hose to make sure it is 1.25 inches or less)
- Hose attachment is flexible but not flimsy – Has better airflow than others. Perfect vacuum attachment for under the fridge, dryer lint or hard to reach areas.
- Dryer lint brush is flexible – It is a 28 inch vent & coil cleaning tool designed specifically for reaching hard-to-clean areas like down in your lint trap.
- Both the hose attachment and the lint brush are flexible. If the weather is cold when you receive the crevice tool it may be a little stiff, as it warms to room temperature it will become flexible.
Description
Included in this kit is a 24 inch flexible hose attachment for hard to reach areas like down in your dryer lint trap or under your refrigerator…… Also, included is one 28 inch long Flexible Dryer Vent and Refrigerator Brush, this brush is on twisted wire and flexible and the benefit of that is it will easily conform to the shape of your dryer lint trap…… If your dryer vent is badly clogged use the brush first to get the bulk out then use the vacuum crevice tool.(Doing this will cut down on clogs in your crevice tool even though the suction end of this tool is wide enough to have good airflow and still be small enough for most dryer “Lint traps” (end of tool is 15mm width) …. Both the hose attachment and brush are flexible and can bend back straight. They will arrive flexed/curved for easier shipping but will straighten out or bend to your application of use. To assemble the crevice tool run warm water over the ends of the hose which will make inserting ends easy. The length of vacuum tool may vary by 1/2 inch. ** ….Please make sure that your vacuum hose has a diameter of 1 ¼ inches or less.** Some Shark vacuum cleaners are 1.5 inches which is too big for this crevice tool……This tool will fit most vacuum hoses, but please measure the end of your hose to make sure it will fit….. Does not fit Dyson vacuum cleaners…..Here is a partial list of Shark vacuums that it will fit: Shark Duo Clean, Shark Ion Flex, Shark Flex, Shark Rocket. — The Shark Navigator and Swivel Steering – it will fit inside the hose but is not a tight fit, but will work… Shark Professional it will fit but you need to push it on. Does not fit Newer Bissells (unsure of older Bissells -please measure). If you are not sure if it will fit your vacuum please ask a question and we will respond.
5. EZ SPARES 25-inch Flexible Vacuum Crevice Attachment Crevice Tool Crevice Brush Tool Kit for All 1-1/4" or 1-3/8"(32mm-35mm) Vacuum Hoses
Feature
- Made of High Quality material:25″ Long ,Flexible,fits all vacuums accepting 1 1/4″ (32mm) or 1-3/8″(32mm-35mm) inner diameter attachments.
- Crevice tool:Great for corner, heating ducts, under furniture, along side the refrigerator.
- Flexible bends up to 180 degrees: Don’t worry about trying to contort or bend to reach those spots.”Put the brush into hot water.Soak for a while,take out and drain off.The brush will get straight.”
- Easy to clean:If you want to wash, just rinse with water.
- The brush is TPR material.Good quality and long service life.
6. MaximalPower 25-inch Flexible Long Reach Crevice Tool Attachment 1.25 inches with Removable Brush Head (does not fit Sharks Vacuum with button lock. Check your vacuum hose diameter before purchase)
Feature
- Universal cleaning brush has a standard 1-3/8″ (35mm) inner diameter. Please ensure this size can fit either over or inside your vacuum hose and/or attachments BEFORE placing your order.
- Replace your lost brush attachment, or add one to your cleaning arsenal. Flexible 25 inches long crevice attachment that bends up to 180 degrees.
- Inner diameter is a standard 1.375″ (35mm) size, allowing this attachment to be used with almost any household vacuum!
- Please note : 1) The Radiator brush is an additional tool to be connected on the Long Crevice Tool to collect human hair and Pet hair.Since it’s attached on the flexible Crevice tool through Friction Fit (Press Fit). It may fall off at a certain angle. 2) The Long Crevice tool can fit vacuum hose with 32mm or 35mm diameter.It does not fit Sharks Vacuum with button lock. Please measure your vacuum hose diameter before purchase.
- Fits: Uprights that have attachment hoses, most canister vacuums and all central vacuum systems!
Description
New MaximalPower Replacement Vacuum Attachment for:
25″ Long Crevice 1.375 inches (35mm) Vacuum Cleaner Tool Attachment with Detachable Brush Head
Features:
Replace your lost brush attachment, or add one to your cleaning arsenal.
Flexible 25 inches long crevice attachment that bends up to 180 degrees.
Inner diameter is a standard 1.375″ (35mm) size, allowing this attachment to be used with almost any household vacuum!
Comes with Removable 5 inches Brush Head.
Finally you can clean and dust dryer vents, heating ducts, around refrigerator and cars.
Fits: Uprights that have attachment hoses, most canister vacuums and all central vacuum systems!
Quantity: 1 Long Crevice Attachment & Detachable Brush Head
Can Work With The Following Brands:
Bissell, Dirt Devil, Dyson, Electrolux, Hoover, Kenmore, Miele, Oreck, Panasonic, Shark, etc.
Package includes:
1 x Crevice Tool Attachment (25 inches)
1 x Brush Head Attachment (5 inches)
NOTE:
Universal cleaning brush Inner Diameter: 1.25″ (32mm) Inner Outer Diameter: 1.34″ (34.1mm) Outer Diameter: 1.60″ (40.8mm). Please ensure this size can fit either over or inside your vacuum hose and/or attachments BEFORE placing your order.
7. Eastman 48392 Flexible Stainless Steel Braided Ice Maker Connector with Brass Nuts, 1/4-Inch Comp X 1/4-Inch Comp, 25-Feet
Feature
- LENGTH: The line length of this ice maker connector is 25-feet
- CONNECTION: This connector has 1/4-inch Comp x 1/4-inch Comp connection
- MATERIAL: This ice maker connector hose is made of high-impact braided 304 stainless steel exterior with a PVC core, nylon reinforcement and a clear vinyl outer shell which provides strength
- DURABLE: The sturdy stainless steel supply line makes it durable preventing kinking and has nickel-plated brass nuts which ensure tight fitting
- EASY INSTALLATION: This flexible supply line is very easy to install
Description
Product Description
The Eastman 48392 Ice Maker Connector has a 1/4-inch comp x 1/4-inch comp connection and is 25-feet long. It is an ideal ice maker connector for use, featuring a grade 304 stainless steel braided exterior, plc. core, multi-filament braided nylon reinforcement, and a clear vinyl outer shell. For secure fitting, it comes with nickel-plated brass nuts.
Eastman’s 25′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. This flexible supply line resists corrosion and enables easy installation.
MAINTAINANCE: For use with water in accessible locations only.
• Shut off the water before installing.
• Inspect product before installing. Do not use if damaged in any way.
• Metal nuts – HAND-TIGHTEN, plus ¼ turn with a wrench.
• Do not over tighten.
• Do not use thread lubricants, tape, or putty.
• Do not expose to corrosive materials.
• Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage.
• This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded.
• DO NOT reuse
• CAUTION: Improper installation can cause leaks with water damage.
From the Manufacturer
Eastman’s 25′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.
8. Dryer Vent Cleaner Kit -30inch Clothes Lint Trap Long Flexible Pipe Refrigerator Coil Brush and 24.4inch Flexible Crevice
Feature
- Attachment Specs: 24.4″ Long, Inside Nozzle Fits 1 3/8 Inces(35mm), Fits All Vacuum Hoses with 1.25 Inches or Less
- Brush specs: Full Brush Length: 30” – Without Handle: 25-1/4” – Bristles Diameter: 1-1/2” – Steel Wire Diameter: 3/8” – Pure Wood handle(4-3/4”)
- Hose attachment is flexible but not flimsy – Has better airflow than others and does not clog as easy as others. Perfect vacuum attachment for under the fridge, dryer lint or hard to reach areas.
- Bursh uses: Clean your dryer lint trap, fridge coils/ condenser coils, exhaust vents, AC vents, radiators and under your appliances.
- 100% MONEY-BACK GUARANTEE: Backed by 100% guarantee that you are fully satisfied with product or receive your money back.
Description
Specifications:
NOTE:This Dryer Cleaning kit fits both 32mm vacuum wand. Duct cleaning brush kit: Length: 30 inches.
Dryer vent Never Clogged Again, Low energy consumption and Safe Running.
Vacuum Hose Attachment: Length 24.4 inches.
You can Dip the hose end into warm water to ensure an easy inserting.
It also can be used to clean the dust under furniture and appliances.
Great for corner, heating ducts, under furniture, along side the refrigerator Clean hard to reach areas.
You Can Remove The Lints In Your Dryer Vents, AC / Exhause Vents with The Brush, and Then use The Vacuum Hose Attachment To Clean Dryer Vent Good working performance and quality guaranteed.
Keeping your dryer vents clean is better to improve drying efficiency.
Benefits:
Compatible with all dryer styles and manufacturers, i.e. standup, top loader, stackable.
Fixes most dryer problems with one easy vent and lint receptacle cleaning. Works really well when combined with a vacuum.
Great tool to clean radiators, and outside gutters.
Comfortable sweeper broom handle and easy to bend.
Cleans the underneath part of your fridge, dryers, washers, counters, stoves and more.
Can also be used to sweep chimneys, downspout drains.
Best Lint alternative.
Have Your Vacuum Hose .
9. Vanitek 26-Inch Long Flexible Dryer Vent Cleaner & Refrigerator Condenser Coil Brush Auger Lint Remover
Feature
- The Vanitek multi-use long flexible dryer vent pipe cleaning brush duster tool and fridge-freezer coil cleaner brush features strong bristles for grabbing dust lint & dirt from the highest energy consuming products, and preventing fire risks.
- SPECS: Full Brush Length: 26” – Without Handle: 21-1/4” – Bristles Diameter: 1-1/2” – Steel Wire Diameter: 3/8” – Handle Color: Red
- DESIGN & QUALITY: Sturdy thick nylon bristles mounted on a galvanized wound steel bendable wire shaft moves through narrow slots picking up the lint, with a non-slip controllable rigid plastic handle to reach inaccessible places easily – Lint vacuum remover rubber tip prevents scratches.
- SAVE MONEY: A clean dryer vent reduces clothes drying time, and clean refrigerator condenser coils cools down the contents faster, thereby making the two highest energy consuming products more energy efficient.
- USES: Lower your electric bill by cleaning lint, dust, and cat fur from your compact dryer lint removal trap filter, air path, refridgerator and freezer condensor coils, exhaust vents, AC vents, or just your radiators and tight crevices under counters, appliances and hard to clean areas.
Conclusion
By our suggestions above, we hope that you can found Refrigerator Coil Hose for you.Please don’t forget to share your experience by comment in this post. Thank you!